While on-hook

Ring Tones
The following tones are programmable allowing recognition of call type (Outside, Intercom or Doorphone).

Tone 1

Tone 2

Tone 3

Tone 4

When going off-hook

Dial Tones

Tone 1
Normal

Tone 2
Any one of the following features is set:
• Absent Message
• Background Music
• Call Forwarding
• Call Pickup Deny
• Call Waiting
• Do Not Disturb
• Extension Lock
• Executive Busy Override Deny
• Hot Line
• Timed Reminder

Tone 3
• After pressing TRANSFER or Recall/hookswitch to hold a call temporarily (e.g., Call Splitting)
• While a called PS is being searched
• When Account Code Entry is performed
• When answering a Timed Reminder call with no message

Tone 4
Message waiting indication was received.

When you make calls

Busy Tone

Reorder Tone
The CO line you tried to seize is not assigned or denied.

Ringback Tone 1
Normal ringback tone

Ringback Tone 2
Special ringback tone for DISA call

Do Not Disturb (DND) Tone
The dialed extension is refusing incoming calls.

While off-hook

Indication Tones

Tone 1
Call waiting tone

Tone 2
A call is on hold longer than the specified time.

When talking to an outside party

Warning Tone
This tone is sent 15, 10 and 5 seconds before the specified time for disconnection.

When setting the features or programming

Confirmation Tones

Tone 1
The feature setting was set successfully.

Tone 2
Before paging through an external speaker

Tone 3
Before the following features activate:
• Retrieving a held call
• Picking up another call
• Paging/Answering a paging announcement
• Answering the call through a speaker

Tone 4
Establishing or leaving a conference

Tone 5
A call has been put on hold.