3.3 Information about the Main Processing Card

3.3.1 IPCMPR Card

Function

The IPCMPR card is the preinstalled main processing card with built-in SVM feature (2-channel). The Virtual Cards (CO line/extension) can be installed in Virtual Slots of the IPCMPR card and can be activated with the activation keys. Also, the IPCMPR supports LAN connection so that IP telephones (IP-PTs, IP softphones, SIP Extensions) and PCs can be connected on a private IP network.

Mountable Cards

• Either one of the DSP16 or DSP64 cards (refer to "3.3.2 DSP16 Card (KX-TDE0110) and DSP64 Card (KX-TDE0111)" ) • RMT card (refer to "3.3.3 RMT Card (KX-TDA0196)" )

Notes

	•	Make sure to use the MNT port for PC connection, and the LAN port for LAN connection.
	•	The maximum length of the cable to be connected to the IPCMPR card is 100 m (328 ft).
	•	When connecting the RJ45 connector, attach the ferrite core included with the PBX. Refer to "3.2.8 Attaching a Ferrite Core".
	•	For details about Virtual Slots, refer to "1.4.3 System Capacity".
	•	For details about the activation keys, refer to "2.1 Information about the Activation Keys".
	•	For details about connecting to a LAN, refer to "3.13 LAN Connection".
	•	For details about connecting peripherals, refer to "3.12.1 Connection of Peripherals".
	•	For details about System Initialize Switch, refer to "3.15.1 Starting the PBX".
	•	For details about Reset Button, refer to "5.1.4 Using the Reset Button".

WARNING

A LITHIUM BATTERY IS USED IN THE IPCMPR CARD. THERE IS A RISK OF EXPLOSION IF THE BATTERY IS REPLACED WITH THE INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

CAUTION

	•	Use only the SD Memory Card included with the PBX.
	•	The SD Memory Card contains software for all the processes of the PBX and all the customer data. It can be easily removed and taken away from the PBX by a third party. Therefore, do not allow unauthorized access to prevent data leakage.
	•	The SD Memory Card must be inserted in the SD Memory Card slot of the IPCMPR card before startup.
	•	Do not remove the SD Memory Card while power is supplied to the PBX. Doing so may cause the PBX to fail to start when you try to restart the system.
	•	To prevent data leakage, render the SD Memory Card physically unusable before disposal.

Pin Assignments

MNT Port/LAN Port (10BASE-T/100BASE-TX)

No. Signal Name Input (I)/Output (O) Function 1 TPO+ O Transmit data+ 2 TPO- O Transmit data- 3 TPI+ I Receive data+ 4-5 Reserved – – 6 TPI- I Receive data- 7-8 Reserved – –

3.3.2 DSP16 Card (KX-TDE0110) and DSP64 Card (KX-TDE0111)

Function

DSP16: 16-channel digital signal processor card with a 4-Channel IP Trunk activation key and a 8-Channel IP Proprietary Telephone activation key preinstalled. Compliant with ITU-T G.729A and G.711 CODEC methods. To be mounted on the IPCMPR card. DSP64: 64-channel digital signal processor card with four 4-Channel IP Trunk activation keys and four 8-Channel IP Proprietary Telephone activation keys preinstalled. Compliant with ITU-T G.729A and G.711 CODEC methods. To be mounted on the IPCMPR card.

Accessories and User-supplied Items

Accessories (included): Screws × 3

User-supplied (not included): none

Notes

	•	Depending on the number and the type of IP CO lines and IP telephones you wish to use, required activation keys are determined, and either the DSP16 or DSP64 card is selected to be installed.
	•	If the preinstalled activation keys on the DSP16 or DSP64 cards are not enough for the desired configuration, you need to purchase activation key codes. For details about the activation keys, refer to "2.1 Information about the Activation Keys".
	•	When installing the DSP16 or DSP64 card, hold down the shaded areas of the card to connect it firmly.

3.3.3 RMT Card (KX-TDA0196)

Function

Analog modem card for remote communication with the PBX. ITU-T V.90 support. To be mounted on the IPCMPR card.

Accessories and User-supplied Items

Accessories (included): Screws × 2

User-supplied (not included): none